Baja Motorsports DR70 Rear Shock Mod

Existing technical info specific to Chinese Mfrs.
Respond to topics with questions or comments.
Post new topics in Chinese Mfrs Community.
Post Reply
User avatar
Site Admin
Posts: 1215
Joined: May 02, 2016

Baja Motorsports DR70 Rear Shock Mod

Post by 4Strokes » Sun Jun 05, 2016 2:46 pm

Topic: Baja Motorsports DR70 Rear Shock Mod
Author: Admin
Posted: 09/04/2007 10:28:24 AM

I will post more on this as more develops, I am still working on another solution, but here is one solution for replacing the Rear Mono-shock on the Baja Motorsports DirtRunner 70.

Part Number 94095, Response Shock from Napa Auto Parts $14.99

This part is a substitute, it will fit when it is almost entirely compressed, only leaves about 1 to 2 inches of compression when fully installed. Trick is that you must cut or grind off the rubber outer lips and metal inner lip on the ends of the eye-loops, (not tough, just takes a little time depending on what tools you have available. ie saw or grinder) but other than that it works. It works and gives a pretty supportive (stiffer) ride, will need to test it at the track and let you know further findings.

I would like to find a comparable part that isn't quite so long and will keep up the search, I'll let you know more when I find one.

Note: The Yamaha PW80 is supposed to have a compatible rear shock but I haven't yet confirmed it.

By Forum Member: RockOn

Original URL: © 2016

Post Reply