Registration Decal Saver

Technical info not specific to a particular mfr.
Respond to existing topics with questions or comments.
Post Reply
User avatar
Site Admin
Posts: 1215
Joined: May 02, 2016

Registration Decal Saver

Post by 4Strokes » Thu Jun 16, 2016 8:46 am

regsvr.jpg (9.45 KiB) Viewed 1139 times
If you live in California or any other state where registration decals are required and you have to place it on the fork tube, here's a nifty idea that allows removal and re-installation of your the decal without damage. Go down to your local hardware store and buy a fluorescent light bulb safety guard. They are very inexpensive and the tubes are Clear UV stabilized so they won't turn yellow.

Directions: Cut a section equal to the length between the top and bottom triple-clamps or the width of the decal. Apply your registration decal to the tube section. Slit the tube lengthwise and slip it on the fork. That's it!

This clear tubing can be used for numerous other things like fork guards, crossbar pad map holder, etc. You're only limited by your imagination!

Post Reply