Page 1 of 1

Wiring in LED License Plate Frame Question [XR650L]

Posted: Sat Feb 16, 2019 12:55 pm
by Toolman44092
I have an illuminated license plate frame coming from Procycle. I can't seem to find an answer for this question. Do I connect it to the brown tail light wire? I'm assuming this is what I would do, but I just wanted confirmation from someone that knows about this. Thanks!

Re: Wiring in LED License Plate Frame Question [XR650L]

Posted: Sun Feb 17, 2019 9:19 am
by JoeRC51
You will use 2 of the 3 wires to the tail light. 1 is ground , 1 is constant power to the tail light and the other is only energized when a brake is applied. You'll be using ground and the constant tail light wires. Get yourself a meter to figure out which is which.

Re: Wiring in LED License Plate Frame Question [XR650L]

Posted: Sun Feb 17, 2019 1:07 pm
by Toolman44092
Thank you. I already know the color of the wires. I just needed to know which ones to use. No directions were included.