Motion Pro Chain Alignment Tool

Product and Service Reviews performed by or for 4Strokes.com and Sponsor Press Releases.
User avatar
4Strokes
Site Admin
Posts: 1228
Joined: May 02, 2016

Motion Pro Chain Alignment Tool

Postby 4Strokes » Tue Mar 21, 2017 1:08 pm

For those of you that don't know, Motion Pro is a company specializing in unique and very useful tools and accessories for off-road motorcycles.

chaintool.jpg
Motion Pro Chain Alignment Tool
Another quality tool from Motion Pro designed to make lives easier. The Motion Pro Chain Alignment Tool is designed to clamp onto a rear sprocket and help with alignment of the rear tire. When clamped onto the rear sprocket, the Chain Alignment Tool has a steel rod that points forward along the length of the chain allowing you to sight down the rod and chain to properly align the rear tire within the swing-arm. While sighting down the rod it's fairly easy to see if the rear wheel is cocked to one side or the other. A picture of the Chain Alignment Tool clamped to a rear sprocket can be seen here on the Motion Pro Website. Another method of aligning a rear tire might be to measure from the inside edge of the swing-arm to the edge of the rim on either side and comparing the measurements.

At the time of this review, cost on the Motion Pro Chain Alignment Tool (P/N: 08-0048) was $26.30 and can be ordered from your favorite retailer.

4Strokes.com Rating - 1 2 3 4 5
The Chain Alignment Tool is another quality tool from Motion Pro. Although it worked as intended, it's not the only way, or cheapest way, to align a rear tire within a swing-arm. We rated the Motion Pro Chain Alignment Tool at 3. Originally published on or about 3/30/2003.

Motion Pro, Inc.
867 American Street
San Carlos, CA 94070
Phone: 650-594-8131
Website: www.motionpro.com

Return to “Product Reviews by 4Strokes.com”

Who is online

Users browsing this forum: No registered users and 1 guest